Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum ABS is an easy material to print with provided you have a heated bed and sealed chamber. A good starting point for a successful print is to have your hot end around 235degrees and your hot bed around 100 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum ABS is an easy material to print with provided you have a heated bed and sealed chamber. A good starting point for a successful print is to have your hot end around 235degrees and your hot bed around 100 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum ABS is an easy material to print with provided you have a heated bed and sealed chamber. A good starting point for a successful print is to have your hot end around 235degrees and your hot bed around 100 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
PA 12 (also known as Nylon 12) is a good general-use plastic with broad additive applications and is known for its toughness, tensile strength, impact strength and ability to flex without fracture. PA 12 has long been used by injection molders due to these mechanical properties. Made in Australia by Aurarum
PA 12 (also known as Nylon 12) is a good general-use plastic with broad additive applications and is known for its toughness, tensile strength, impact strength and ability to flex without fracture. PA 12 has long been used by injection molders due to these mechanical properties. Carbon Fiber adds stiffness and makes your parts lighter. Made in Australia by Aurarum
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum TPU is an easy material to print with provided you have direct drive extruder. A good starting point for a successful print is to have your hot end around 220degrees and your hot bed from room temperature to 70C degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria. Aurarum Brand
Aurarum TPU is an easy material to print with provided you have direct drive extruder. A good starting point for a successful print is to have your hot end around 220degrees and your hot bed from room temperature to 70C degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria. Aurarum Brand
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
PA6 is a much more difficult material in 3D printing than popular PLA or ABS. Its operating temperature range is 250-270°C, so you should ensure a suitable working environment with the material, so that the material does not shrink - closed working chambers of the 3D printer are recommended. Carbon fibers adds stiffness and make your parts lighter Made in…
PA6 is a much more difficult material in 3D printing than popular PLA or ABS. Its operating temperature range is 250-270°C, so you should ensure a suitable working environment with the material, so that the material does not shrink - closed working chambers of the 3D printer are recommended. Carbon fibers adds stiffness and make your parts lighter Made in…
PA6 is a much more difficult material in 3D printing than popular PLA or ABS. Its operating temperature range is 250-270°C, so you should ensure a suitable working environment with the material, so that the material does not shrink - closed working chambers of the 3D printer are recommended. Carbon fibers adds stiffness and make your parts lighter Made in…
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PPLA (PLA+) is a very easy material to print with ? A good starting point for a successful print is to have your hot end around 210 degrees and your hot bed around 60 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PPLA (PLA+) is a very easy material to print with ? A good starting point for a successful print is to have your hot end around 210 degrees and your hot bed around 60 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum TPU is an easy material to print with provided you have direct drive extruder. A good starting point for a successful print is to have your hot end around 220degrees and your hot bed from room temperature to 70C degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria. Aurarum Brand
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Chromium filler is an environmentally friendly 3D printing material that can be polished to present the appearance of chromium. This material is very abrasive and hardenned steel nozzles are recommended. Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot…
Aurarum PLA is the easiest material to print with. A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Iron filler is an environmentally friendly 3D printing material that can be polished to present the appearance of iron. It is odorless during printing. the printing is smooth, without problems such as warping and cracking. This material is very abrasive and hardenned steel nozzles are recommended. Aurarum PLA is the easiest material to print with ? A good starting point…
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Stainless steel filler is an environmentally friendly 3D printing material that can be polished to present the appearance of stainless steel. It is odorless during printing. On the basis of maintaining the original PLA performance, the filament are not easy to break; the printing is smooth, without problems such as warping and cracking, and the polishing has a metallic texture.…
Tungsten filler is an environmentally friendly 3D printing material that can be polished to present the appearance of tungsten. This material is very abrasive and hardenned steel nozzles are recommended. Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot…
Aurarum PLA is the easiest material to print with. A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with. A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with. A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with. A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with. A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with. A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PPLA (PLA+) is a very easy material to print with ? A good starting point for a successful print is to have your hot end around 210 degrees and your hot bed around 60 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PPLA (PLA+) is a very easy material to print with ? A good starting point for a successful print is to have your hot end around 210 degrees and your hot bed around 60 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PPLA (PLA+) is a very easy material to print with ? A good starting point for a successful print is to have your hot end around 210 degrees and your hot bed around 60 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PPLA (PLA+) is a very easy material to print with ? A good starting point for a successful print is to have your hot end around 210 degrees and your hot bed around 60 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PPLA (PLA+) is a very easy material to print with ? A good starting point for a successful print is to have your hot end around 210 degrees and your hot bed around 60 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PPLA (PLA+) is a very easy material to print with ? A good starting point for a successful print is to have your hot end around 210 degrees and your hot bed around 60 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria. please note even though we often have bulk spools in stock it…
Aurarum PPLA (PLA+) is a very easy material to print with ? A good starting point for a successful print is to have your hot end around 210 degrees and your hot bed around 60 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PPLA (PLA+) is a very easy material to print with ? A good starting point for a successful print is to have your hot end around 210 degrees and your hot bed around 60 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PPLA (PLA+) is a very easy material to print with ? A good starting point for a successful print is to have your hot end around 210 degrees and your hot bed around 60 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PPLA (PLA+) is a very easy material to print with ? A good starting point for a successful print is to have your hot end around 210 degrees and your hot bed around 60 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PPLA (PLA+) is a very easy material to print with ? A good starting point for a successful print is to have your hot end around 210 degrees and your hot bed around 60 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum TPU is an easy material to print with provided you have direct drive extruder. A good starting point for a successful print is to have your hot end around 220degrees and your hot bed from room temperature to 70C degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria. Aurarum Brand
Aurarum TPU is an easy material to print with provided you have direct drive extruder. A good starting point for a successful print is to have your hot end around 220degrees and your hot bed from room temperature to 70C degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria. Aurarum Brand
Aurarum TPU is an easy material to print with provided you have direct drive extruder. A good starting point for a successful print is to have your hot end around 220degrees and your hot bed from room temperature to 70C degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria. Aurarum Brand
Aurarum TPU is an easy material to print with provided you have direct drive extruder. A good starting point for a successful print is to have your hot end around 220degrees and your hot bed from room temperature to 70C degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria. Aurarum Brand
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
HIPS, or High Impact Polystyrene, is a dissolvable support material that is commonly used with ABS. When being used as a support material, HIPS can be dissolved in d-Limonene, leaving your print free of any markings caused by support removal. Made in Australia by Aurarum
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum ABS is an easy material to print with provided you have a heated bed and sealed chamber. A good starting point for a successful print is to have your hot end around 235degrees and your hot bed around 100 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum ABS is an easy material to print with provided you have a heated bed and sealed chamber. A good starting point for a successful print is to have your hot end around 235degrees and your hot bed around 100 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum ABS is an easy material to print with provided you have a heated bed and sealed chamber. A good starting point for a successful print is to have your hot end around 245degrees and your hot bed around 100 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum TPU is an easy material to print with provided you have direct drive extruder. A good starting point for a successful print is to have your hot end around 220degrees and your hot bed from room temperature to 70C degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria. Aurarum Brand
Aurarum TPU is an easy material to print with provided you have direct drive extruder. A good starting point for a successful print is to have your hot end around 220degrees and your hot bed from room temperature to 70C degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria. Aurarum Brand
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
PET has higher clarity and higher impact strength than the PETG. Aurarum PET is a moderately easy material to print with provided you have a heated and well levelled bed ? A good starting point for a successful print is to have your hot end around 255degrees and your hot bed around 60 degrees. please note even though we often…
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed ? A good starting point for a successful print is to have your hot end around 235degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria. please note even though we…
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum ABS is an easy material to print with provided you have a heated bed and sealed chamber. A good starting point for a successful print is to have your hot end around 235degrees and your hot bed around 100 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria. Aurarum Brand
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Aurarum ABS is an easy material to print with provided you have a heated bed and sealed chamber. A good starting point for a successful print is to have your hot end around 235degrees and your hot bed around 100 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.