Aurarum PLA 3D Printer Filament – Tungsten Fill 1.75mm 1Kg
Tungsten filler is an environmentally friendly 3D printing material that can be polished to present the appearance of tungsten.
This material is very abrasive and hardenned steel nozzles are recommended.
Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees.
All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
In stock (can be backordered)
PLA is a biobased polymer derived from natural resources and offers a significant reduction in carbon footprint compared to oil-based
Best settings for successful printing:
|Printing / Extrusion temperature||200 to 230 degrees|
|Bed Temperature||20 to 60 degrees|
PLA can be printed on a much cooler heated bed or if you have a well levelled bed maybe even no heat at all.
|Transparency (colour dependent)||2/10 to 8/10|
Like any 3D printing a well ventilated space is preferred and good storage is the key to a good shelf life of your filament. All our filament is shipped in a vac sealed bag containing a small desiccant satchel. When opening your bag a clean cut along the top edge will allow you reuse that bag again if you do not finish the entire reel in 1 go.
|Reel Size||200h x 65w|
|Weight / metres||1kg /290 metres (approx)|
|Filament width||1.75mm +/- 0.03mm|
|Spool||Plastic, Vacuum packed|
Aurarum PLA is printer agnostic and as such is suitable for all brands including Flashforge, RepRap, Creality, Artillery, MakerBot, Ultimaker, Makergear, Up!, Voron, Bamboo and many others.
|Dimensions||25 × 25 × 10 cm|