Aurarum PET 3D Printer Filament – Bulk 3-5Kg (Choose Size And Colour)

PET has higher clarity and higher impact strength than the PETG.

Aurarum PET is a moderately easy material to print with provided you have a heated and well levelled bed ? A good starting point for a successful print is to have your hot end around 255degrees and your hot bed around 60 degrees.

please note even though we often have bulk spools in stock it might take 1-2 weeks to send your order.

All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.

Support a local Australian business supporting Aussie families.

This product is currently out of stock and unavailable.

SKU: 602024399698 Category: Tags: , , , ,


Aurarum PET 3D Printer Filament

About PET

PET is a very strong and sturdy filament.? It is perfect for building water bottles, automotive trim pieces and car parts.? It is also used for producing mechanical parts due to its fatigue resistant properties.

It comes in many colours, blends and requires a heated bed to print with and is often a little more difficult to print with than PLA.


Best settings for successful printing:

Printing / Extrusion temperature 240 to 280 degrees
Bed Temperature 60 ?to 90 degrees
Printing Speed 20-80mm/s


PET is a highly recyclable material.? It is renewable and is requires some ventilation when printing as the off gasses are noticeable.

PET must be printed on a medium temperature heated bed to avoid warping.


Strength 8/10
Detail level 9/10
Smooth Finish 7/10
Transparency (colour dependent) 2/10 to 8/10
Flexibility 3/10


Like any 3D printing a well ventilated space is preferred and good storage is the key to a good shelf life of your filament.? All our filament is shipped in a vac sealed bag containing a small desiccant satchel.? When opening your bag a clean cut along the top edge will allow you reuse that bag again if you do not finish the entire reel in 1 go.

Aurarum PET is printer agnostic and as such is suitable for all brands including Flashforge, RepRap, Creality, Artillery, MakerBot, Ultimaker, Makergear, Up! … and many others.

Additional information

Weight 1.3 kg
Dimensions 25 × 25 × 10 cm

1.75mm, 2.85(3)mm


Black, White, Silver, RED, Grey, Blue, Metallic Purple, Yellow, Orange, Green, Gold, Charcoal, Natural (clear), Silver Carbon Fiber, Carbon Fiber

Spool size

2kg, 3kg, 4kg, 5kg



Aurarum is a true Australian manufacturer that is here to support and provide you with 3D printer supplies. We manufacture and sell 3D printer filament that will fulfil your 3D printing needs. Among our 3D printer supplies, we can offer you 3D printer filament, Flashforge and ideaPrinters 3D printer and other 3D printer spare parts and parts required for your DIY project. Even though we are a manufacturer we welcome business, retail and wholesale customers. Apart from our 3D printer supplies, we can offer you a 3D printing service. No job is too small for us. Friendly and welcoming service will make sure that you are 100% satisfied with our service and we will see you back again. Our Australian made 3D printer filament is of the highest quality and yet with affordable price. The price is a lot lower than what you would expect to pay for a quality product. In our assortment, you will find PLA, ABS, Nylon, TPE and HIPS 3D printer filaments. Our colour range is wide as well it has 20 standard colours ranging from natural to something like safety yellow and safety orange that are quite bright compared to the other colours. On top of our standard colours, we can offer 4 glow in the dark colours Blue, Green, Violet and Aqua Blue. Using quality 3D printing supplies saves you time and money. As part of our services we can offer OEM service, where we would produce your branded filament. To the architects and everyone else we can offer colour matching service – the colour of the filament can be matched to the item that you have. So if you are after quality 3D printer supplies, 3D printing or a 3D printer look no further. We are here to help you with all your needs.