Aurarum PPLA 3D Printer Filament – Silky Red 1.75mm 1Kg
AUD34.95 Inc GST
Aurarum PPLA (PLA+) is a very easy material to print with ? A good starting point for a successful print is to have your hot end around 210 degrees and your hot bed around 60 degrees.
All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
In stock
Description
About PPLA
PPLA (Polylactic Acid +) is a variation on PLA and is fast becoming more popular than PLA. It has an additive increase the smoothness of the surface finish and is less hygroscopic (absorbs less moisture).
The finish silky smooth shiny surface.
It comes in many colours, blends and is usually very easy to print with and is often though to be similar to ABS in its properties.
Best settings for successful printing:
Printing / Extrusion temperature | 220 to 250 degrees |
Bed Temperature | 70 to 90 degrees |
Printing Speed | 20-80mm/s |
PPLA is biodegradable material made using cornstarch or sugarcane.? It is renewable and is much safer than something like ABS for example.
PPLA can be printed on a medium heated bed.
Strength | 8/10 |
Detail level | 9/10 |
Smooth Finish | 9/10 |
Transparency (colour dependent) | 2/10 to 8/10 |
Flexibility | 2/10 |
Like any 3D printing a well ventilated space is preferred and good storage is the key to a good shelf life of your filament.? All our filament is shipped in a vac sealed bag containing a small desiccant satchel.? When opening your bag a clean cut along the top edge will allow you reuse that bag again if you do not finish the entire reel in 1 go.
Reel Size | 200h x 65w |
Weight / metres | 1kg / 340 metres (approx) |
Filament width | 1.75mm +/- 0.03mm |
Spool | Plastic, Vacuum packed |
One of the best things about PPLA, like PLA is the ease of post processing.? Sanding and painting is made simple making it easy to get a very finished and polished look even from the roughest of prints.
Aurarum PPLA is printer agnostic and as such is suitable for all brands including Flashforge, RepRap, Creality, Artillery, MakerBot, Ultimaker, Makergear, Up! … and many others.
Additional information
Weight | 1.3 kg |
---|---|
Dimensions | 25 × 25 × 10 cm |
Brand
Aurarum
Related products
-
- 1.75mm filament
Aurarum PLA 3D Printer Filament – Grey 1.75mm 1Kg
- AUD25.56 - AUD31.95 Inc GST
- Add to cart
-
- 1.75mm filament
Aurarum PLA 3D Printer Filament – Black 1.75mm 1Kg
- AUD25.56 - AUD31.95 Inc GST
- Add to cart
-
- 1.75mm filament
Aurarum PLA 3D Printer Filament – Platinum/Titanium 1.75mm 1Kg
- AUD25.56 - AUD31.95 Inc GST
- Add to cart