Aurarum PLA 3D Printer Filament – Stainless Steel 1.75mm 1Kg

Original price was: AUD84.95.Current price is: AUD64.95. Inc GST

Stainless steel filler is an environmentally friendly 3D printing material that can be polished to present the appearance of stainless steel. It is odorless during printing. On the basis of maintaining the original PLA performance, the filament are not easy to break; the printing is smooth, without problems such as warping and cracking, and the polishing has a metallic texture.

This material is very abrasive and hardenned steel nozzles are recommended.

Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees.

All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.


In stock (can be backordered)

Quantity Discount (%) Price
1 - 11 AUD64.95
12 - 23 7.5 % AUD60.08
24 - 47 15 % AUD55.21
48+ 20 % AUD51.96


About PLA

PLA is a biobased polymer derived from natural resources and offers a significant reduction in carbon footprint compared to oil-based

Best settings for successful printing:

Printing / Extrusion temperature 200 to 230 degrees
Bed Temperature 20 to 60 degrees
Printing Speed 40-150mm/s



PLA can be printed on a much cooler heated bed or if you have a well levelled bed maybe even no heat at all.

Strength 6/10
Detail level 9/10
Smooth Finish 9/10
Transparency (colour dependent) 2/10 to 8/10
Flexibility 3/10


Like any 3D printing a well ventilated space is preferred and good storage is the key to a good shelf life of your filament. All our filament is shipped in a vac sealed bag containing a small desiccant satchel. When opening your bag a clean cut along the top edge will allow you reuse that bag again if you do not finish the entire reel in 1 go.

Reel Size 200h x 65w
Weight / metres 1kg /290 metres (approx)
Filament width 1.75mm +/- 0.03mm
Spool Plastic, Vacuum packed

Aurarum PLA is printer agnostic and as such is suitable for all brands including Flashforge, RepRap, Creality, Artillery, MakerBot, Ultimaker, Makergear, Up!, Voron, Bamboo and many others.

Additional information

Weight 1.3 kg
Dimensions 25 × 25 × 10 cm



Aurarum is a true Australian manufacturer that is here to support and provide you with 3D printer supplies. We manufacture and sell 3D printer filament that will fulfil your 3D printing needs. Among our 3D printer supplies, we can offer you 3D printer filament, Flashforge and ideaPrinters 3D printer and other 3D printer spare parts and parts required for your DIY project. Even though we are a manufacturer we welcome business, retail and wholesale customers. Apart from our 3D printer supplies, we can offer you a 3D printing service. No job is too small for us. Friendly and welcoming service will make sure that you are 100% satisfied with our service and we will see you back again. Our Australian made 3D printer filament is of the highest quality and yet with affordable price. The price is a lot lower than what you would expect to pay for a quality product. In our assortment, you will find PLA, ABS, Nylon, TPE and HIPS 3D printer filaments. Our colour range is wide as well it has 20 standard colours ranging from natural to something like safety yellow and safety orange that are quite bright compared to the other colours. On top of our standard colours, we can offer 4 glow in the dark colours Blue, Green, Violet and Aqua Blue. Using quality 3D printing supplies saves you time and money. As part of our services we can offer OEM service, where we would produce your branded filament. To the architects and everyone else we can offer colour matching service – the colour of the filament can be matched to the item that you have. So if you are after quality 3D printer supplies, 3D printing or a 3D printer look no further. We are here to help you with all your needs.