Aurarum PLA 3D Printer Filament – Matte Yellow 1.75mm 1Kg

AUD44.95 Inc GST

Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees.

All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.

Support a local Australian business supporting Aussie families.

In stock

Quantity Discount (%) Price
1 - 11 AUD44.95
12 - 23 7.5 % AUD41.58
24+ 12 % AUD39.56
SKU: PLAMatteYellow Category: Tags: , ,


Aurarum PLA 3D Printer Filament – Matte Yellow 1.75mm 1Kg

About PLA

PLA (Polylactic Acid) is by far the most popular material used in 3D printing today.

It comes in many colours, blends and is usually very easy to print with.


Best settings for successful printing:

Printing / Extrusion temperature 185 to 220 degrees
Bed Temperature 20 to 60 degrees
Printing Speed 40-100mm/s


PLA is biodegradable material made using cornstarch or sugarcane.? It is renewable and is much safer than something like ABS for example.

PLA can be printed on a much cooler heated bed or if you have a well levelled bed maybe even no heat at all.

Strength 6/10
Detail level 9/10
Smooth Finish 9/10
Transparency (colour dependent) 2/10 to 8/10
Flexibility 1/10


Like any 3D printing a well ventilated space is preferred and good storage is the key to a good shelf life of your filament.? All our filament is shipped in a vac sealed bag containing a small desiccant satchel.? When opening your bag a clean cut along the top edge will allow you reuse that bag again if you do not finish the entire reel in 1 go.

Reel Size 200h x 65w
Weight / metres 1kg / 340 metres (approx)
Filament width 1.75mm +/- 2mm
Spool Plastic, Vacuum packed


One of the best things about PLA is the ease of post processing.? Sanding and painting is made simple making it easy to get a very finished and polished look even from the roughest of prints.

Aurarum PLA is printer agnostic and as such is suitable for all brands including Flashforge, RepRap, Creality, Artillery, MakerBot, Ultimaker, Makergear, Up! ? and many others.



Aurarum is a true Australian manufacturer that is here to support and provide you with 3D printer supplies. We manufacture and sell 3D printer filament that will fulfil your 3D printing needs. Among our 3D printer supplies, we can offer you 3D printer filament, Flashforge and ideaPrinters 3D printer and other 3D printer spare parts and parts required for your DIY project. Even though we are a manufacturer we welcome business, retail and wholesale customers. Apart from our 3D printer supplies, we can offer you a 3D printing service. No job is too small for us. Friendly and welcoming service will make sure that you are 100% satisfied with our service and we will see you back again. Our Australian made 3D printer filament is of the highest quality and yet with affordable price. The price is a lot lower than what you would expect to pay for a quality product. In our assortment, you will find PLA, ABS, Nylon, TPE and HIPS 3D printer filaments. Our colour range is wide as well it has 20 standard colours ranging from natural to something like safety yellow and safety orange that are quite bright compared to the other colours. On top of our standard colours, we can offer 4 glow in the dark colours Blue, Green, Violet and Aqua Blue. Using quality 3D printing supplies saves you time and money. As part of our services we can offer OEM service, where we would produce your branded filament. To the architects and everyone else we can offer colour matching service – the colour of the filament can be matched to the item that you have. So if you are after quality 3D printer supplies, 3D printing or a 3D printer look no further. We are here to help you with all your needs.

Additional information

Weight 1.3 kg
Dimensions 25 × 25 × 10 cm