Aurarum Vega 300 IDEX COREXY 3D printer 200+mm/s (325x340x420)

AUD5,495.00 Inc GST

Meet our large scale Australian designed and built 3D printer.

The 3d printer has a build volume up to 325x340x420

It comes with dual extruders that allow you to 3d print either in 2 colours/materials

CoreXY for fast printing – printing speed 200+mm/s

High flow Rapido hotend

Approx delivery time 2 weeks.

Comes with two Sunlu filament dryers

In stock (can be backordered)

SKU: 602024399834 Category:



Large build volume – 325x340x420 – that is 46 liters of build volume in a single mode

IDEX mode creates two beds:

  • Copy mode allows printing parts up to 200x340x420
  • In mirror mode bed us 180x340x420
Dual independent extruders – IDEX allows multiple modes of printing:

  • Single material single extruder
  • Two colour printing
  • Main material plus supports material dual extruder printing
  • Copy mode – two of the same parts being printed at the same time.
  • Mirror mode printing
  • Mirror and copy printing modes double printing speed
Easy to remove extruders – all it takes is to undo 2 screws and disconnect single cable

This allows easy swap bettween the spare extruders potentially having different nozzles

Easy to maintain

Quality components – we use Hiwin linear rails and ballscrews for the motion system

Ballscrews are independent for left to right levelling

Motion X/Y: Hiwin linear rails, 10mm GT2 belts suitable up to 120C

High quality large gear extruders made by Bondtech

Ensured great extrusion properties and compatibility with soft materials as well

They require little to no maitenance

Controller: Duet3d with a touchscreen

Wifi connectivity for the file transfer and printer control

Duet controllers run on RepRap firmware that is used industry wide as a reliable solution

It is widely used in industrial application

Allows future feature integration with relatively easy upgrade installation

Our printers come with Auto Bed Levelling that is done utilising BLtouch sensor
Bed: 16mm tooling grade cast aliuminium bed for maximum flatness

This grade of aliuminium reduces warping possibility

The printer comes with a magnetic PEI bed that works really well with most materias

The bed can be used up to 120C

Chamber is not heated from it heats up to 55-60C from the bed

Phaetus Rapido Plus Ultra High Flow hotends are used in Vega printers

These extruders have flow of over 80mm3/s (depending on the material and

the nozzle size)

The hotend is capable up to 350C and can be fitted with hardened nozzles

Proudly designed and built in Australia – by us in Melbourne
Compatible materials PLA, ABS, ASA, PETG, TPU, TPE, Carbon fiber variations and more
Construction Frame: Aliuminium frame, fully enclosed with acrylic sides and doors
Movement speeds Up to 300mm/s
Dimensions: 670x540x800



Additional information

Weight 75 kg
Dimensions 80 × 80 × 80 cm



Aurarum is a true Australian manufacturer that is here to support and provide you with 3D printer supplies. We manufacture and sell 3D printer filament that will fulfil your 3D printing needs. Among our 3D printer supplies, we can offer you 3D printer filament, Flashforge and ideaPrinters 3D printer and other 3D printer spare parts and parts required for your DIY project. Even though we are a manufacturer we welcome business, retail and wholesale customers. Apart from our 3D printer supplies, we can offer you a 3D printing service. No job is too small for us. Friendly and welcoming service will make sure that you are 100% satisfied with our service and we will see you back again. Our Australian made 3D printer filament is of the highest quality and yet with affordable price. The price is a lot lower than what you would expect to pay for a quality product. In our assortment, you will find PLA, ABS, Nylon, TPE and HIPS 3D printer filaments. Our colour range is wide as well it has 20 standard colours ranging from natural to something like safety yellow and safety orange that are quite bright compared to the other colours. On top of our standard colours, we can offer 4 glow in the dark colours Blue, Green, Violet and Aqua Blue. Using quality 3D printing supplies saves you time and money. As part of our services we can offer OEM service, where we would produce your branded filament. To the architects and everyone else we can offer colour matching service – the colour of the filament can be matched to the item that you have. So if you are after quality 3D printer supplies, 3D printing or a 3D printer look no further. We are here to help you with all your needs.

You may also like…