Vision Miner – 3D Printer Bed Nano Polymer Adhesive
AUD59.95 – AUD104.95 Inc GST
- Designed for PEEK, PEI and high-temperature materials
- No Mess like Glue Stick or Hair Spray – Better Grip
- Works on Many Surfaces (glass, carbons, resins, etc)
- Easy to clean and re-apply
- Works with normal-temperature materials like ABS, PLA, and Nylon
- Made from safe, non-toxic, organic compounds
Description
HOW TO APPLY
-
Clean Glass (use water, windex, or alcohol)
-
Apply Adhesive (spread evenly on Build Area)
-
Calibrate your first layer height
-
Print Your Part
-
Remove part
HIGH TEMP
When you’re extruding over 300ºC, remove the part as quickly as possible. You want the build plate and part to be HOT when you remove it — high-temp materials contract extremely quickly when cooling, and parts can shatter glass in less than 30 seconds.
LOW TEMP
When you’re extruding below 300ºC, generally you can remove the part as soon as the plate cools. With materials like PLA or PETG, it usually pops itself off the plate. If it sticks too much, you can apply water around the base of the part, which will help it release. Make sure your first layer is PERFECT — if it is too close, even without adhesives, ABS & PETG will break and chip glass.
! CAUTION when using ABS & PETG on Glass !
Even without adhesives, ABS and PETG are well known to break glass.
ABS contracts very quickly when it cools; because of this, the risk of chipping, chunking, or breaking glass is higher with ABS. We recommend using Kapton Tape, PEI, or some other type of protective surface on top of glass when printing ABS.
Make sure your first layer is PERFECT — if it is too close, you risk breaking your glass. This is well documented in the community and we are not responsible for your broken build plates, especially when your first layer is smashed into the plate. Many people have set an extra-close z-offset to stick their filament to the bed — with our adhesive, this is unnecessary.
ENSURE PROPER LEVELING. High-temp materials must be removed extremely quickly. High Performance Polymers cool faster than glass, which can cause chipping. Prevent this by removing parts quickly.
Additional information
Weight | 0.5 kg |
---|---|
Dimensions | 8 × 20 × 4 cm |
Size | 50mL, 120mL |