Prusa i3 MK3S+/MK3S / MK2.5S Mosquito®

AUD219.95 Inc GST

A lightweight high-resolution extruder upgrade for the popular Prusa i3 MK3S and MK2.5S 3D printers with optimized design to use Mosquito and Mosquito Magnum hotends.

Upgrade Your Prusa

Upgrade your Prusa with a Bondtech Mini Geared extruder featuring higher gear ratio – 3:1 – that allows for extra push force and higher resolution.

Print Faster Or With Higher Quality

This lightweight extruder will allow your 3D printer to print faster or to achieve even better surface quality.

Reduce 3D Printing Issues

Decrease the risk of heat creep to avoid clogs and improve filament feeding by avoiding slipping and deformation that cause under and over extrusion issues.

In stock

x
SKU: EXT-KIT-69 Category:

Description

Upgrade kit With Optimized Design to fit Mosquito hotends

This is a Bondtech upgrade for the popular Prusa I3 MK3S+/MK3S and MK2.5S that will allow the use of the world acclaimed Mosquito hotends.

Bondtech Extruder For Prusa i3 MK2.5S & MK3S + MK3S+

This kit contains only the necessary parts to convert your current extruder to our own popular design based upon the BMG (Bondtech Mini Geared) extruder with 3:1 gearing ratio for better precision and resolution together with optimized geometry for the heatsink cooling and professional SLS 3D printed housing.

Working Temperature Limits

Bear in mind that if you use this upgrade kit inside a closed chamber, it will have the following set of working temperature limits:

  • Due to the sensor plastic parts made of HT PLA > up to 60°C (90-100°C when parts are annealed);
  • Due to the stepper motor > up to 80°C.
Product Main Features

This extruder upgrade presents the following main features:

  • Adapted to fit Prusa’s new filament sensor and Mosquito hotends;
  • Includes one Bondtech BMG extruder with 3:1 gearing ratio;
  • Optimized geometry for heat-sink cooling;
  • Less moving weight to reduce vibration and ghosting;
  • Professional SLS 3D printed housing and 3 other key parts.

Technical Specification

Article number : EXT-KIT-69
EAN code : 7350011410675
Net weight : 378g
Gross weight : 389g
Package Size : 137x94x65mm
Gearing ratio : 3:1
E-steps value : 415 @16 bit micro-stepping; or 830 @32 bit micro-stepping
Extruder Housing : SLS Printed parts in Polyamide 12;

STEPPER MOTOR

Lightweight 25 mm pancake stepper with 18 N/m torque.
Max Input Current : 0.8A
Max chamber working temperature : 80℃

X-Carriage: Requires buying or 3D printing new X-Carriage R2 Front and Rear;
Firmware: Bondtech adapted version required.

Brand

Bondtech

The company was established in 2014 by Martin Bondéus, who had previously used the 3D printing technology in his work as a product developer. When certain patents regarding the FDM technology expired at the beginning of the 2010s, Martin set out to build a 3D printer based on a pre-designed kit. The result, however, wasn’t satisfying. The performance and quality just weren’t there. Stubbornly, Martin therefore started building his very own printer from the ground up, not using kit products. This time the result was much better, but unfortunately still not good enough. Grinding, slipping and under extrusion translated into several failed prints. Scouring the internet for advice, he realized that the problem with bad, unreliable extrusion was universal. Everyone seemed to suffer from the same dilemma. An idea was born. Today, Bondtech manufactures Bondtech Dual Drive extruders and other innovative 3D printing products to users and retailers across the world. Constantly improving our offer, we believe this is just the beginning.

Additional information

Weight 0.2 kg
Dimensions 15 × 15 × 15 cm