Aurarum PETG 3D Printer Filament – Charcoal 1.75mm 1Kg
AUD31.95 Inc GST
Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees.
All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
PETG (Glycol modified Polyethelene Terephthalate) is a very strong and sturdy filament. It is perfect for building water bottles, automotive trim pieces and car parts.? It is also used for producing mechanical parts due to its fatigue resistant properties.
bisphenol A (BPA)-free polyethylene terephthalate glycol modified (PETG) grade. Offers high transparency, chemical resistance and moldability, superior mechanical properties and exceptional processability. Exhibits high heat deflection temperature (HDT) and maintains long-lasting clarity even under the toughest conditions.
Best settings for successful printing:
|Printing / Extrusion temperature
|220 to 250 degrees
|60 to 90 degrees
PETG must be printed on a medium to high temperature heated bed to avoid warping.
|Transparency (colour dependent)
|2/10 to 8/10
|200h x 65w
|Weight / metres
|1kg / 340 metres (approx)
|1.75mm +/- 0.03mm
|Plastic, Vacuum packed
Like any 3D printing a well ventilated space is preferred and good storage is the key to a good shelf life of your filament. All our filament is shipped in a vac sealed bag containing a small desiccant satchel.
PETG is like PLA and PPLA for post processing. Sanding and painting is possible to get a perfect finished look.
Aurarum PETG is printer agnostic and as such is suitable for all brands including Flashforge, RepRap, Creality, Artillery, MakerBot, Ultimaker, Makergear, Up!, Voron, Bamboo … and many others.
|23 × 23 × 8 cm