Aurarum ABS 3D Printer Filament – Bulk 2-5Kg (Choose Size And Colour)
AUD55.95 – AUD129.95 Inc GST
Aurarum ABS is an easy material to print with provided you have a heated bed and sealed chanber ? A good starting point for a successful print is to have your hot end around 235degrees and your hot bed around 100 degrees.
All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Support a local Australian business supporting Aussie families.
Make 4 fortnightly payments from AUD13.99 with More info
Aurarum ABS 3D Printer Filament – Bulk 2-5Kg (Choose Size And Colour)About ABS
ABS (Acrylo Butadiene Sytrene) is a very strong and sturdy filament that is oil based.? It is perfect for building LEGO blocks, toys, instruments, automotive trim and car parts.
It comes in many colours, blends and requires a heated bed and enclosed chamber to print with and is often a little more difficult to print with
Best settings for successful printing:
|Printing / Extrusion temperature||220 to 250 degrees|
|Bed Temperature||90 to 110 degrees|
ABS is not biodegradable material.? It is not renewable and is requires good ventilation when printing as the off gasses are quite strong
ABS must be printed on a high temperature heated bed to avoid warping.
|Transparency (colour dependent)||2/10 to 8/10|
|Reel Size||200h x 65w|
|Weight / metres||1kg / 340 metres (approx)|
|Filament width||1.75mm +/- 2mm|
|Spool||Plastic, Vacuum packed|
Like any 3D printing a well ventilated space is preferred and good storage is the key to a good shelf life of your filament.? All our filament is shipped in a vac sealed bag containing a small desiccant satchel.? When opening your bag a clean cut along the top edge will allow you reuse that bag again if you do not finish the entire reel in 1 go.
ABS requires the use of chemicals, such as Acetone for ?post processing.? Sanding and painting is possible but getting a finished and polished look is better with a chemical mooting agent.
Aurarum ABS is printer agnostic and as such is suitable for all brands including Flashforge, RepRap, Creality, Artillery, MakerBot, Ultimaker, Makergear, Up! … and many others.
|Dimensions||10 × 17 × 17 cm|
Black, White, Silver, RED, Grey, Blue, Metallic Purple, Yellow, Orange, Green, Gold, Charcoal, Natural
2kg, 3kg, 4kg, 5kg