Aurarum ABS 3D Printer Filament – Purple 1.75mm 1Kg

AUD27.95 Inc GST

Aurarum ABS is an easy material to print with provided you have a heated bed and sealed chanber ? A good starting point for a successful print is to have your hot end around 235degrees and your hot bed around 100 degrees.

All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.

Support a local Australian business supporting Aussie families.

Make 4 fortnightly payments of AUD6.99 with Afterpay More info

SKU: 697478824568 Category: Tags: , , , ,

Description

About ABS

ABS (Acrylo Butadiene Sytrene) is a very strong and sturdy filament that is oil based.? It is perfect for building LEGO blocks, toys, instruments, automotive trim and car parts.

It comes in many colours, blends and requires a heated bed and enclosed chamber to print with and is often a little more difficult to print with

 

Best settings for successful printing:

Printing / Extrusion temperature 220 to 250 degrees
Bed Temperature 90 to 110 degrees
Printing Speed 20-80mm/s

 

ABS is not biodegradable material.? It is not renewable and is requires good ventilation when printing as the off gasses are quite strong

ABS must be printed on a high temperature heated bed to avoid warping.

 

Strength 8/10
Detail level 9/10
Smooth Finish 8/10
Transparency (colour dependent) 2/10 to 8/10
Flexibility 4/10

 

Reel Size 200h x 65w
Weight / metres 1kg / 340 metres (approx)
Filament width 1.75mm +/- 2mm
Spool Plastic, Vacuum packed

 

Like any 3D printing a well ventilated space is preferred and good storage is the key to a good shelf life of your filament.? All our filament is shipped in a vac sealed bag containing a small desiccant satchel.? When opening your bag a clean cut along the top edge will allow you reuse that bag again if you do not finish the entire reel in 1 go.

ABS requires the use of chemicals, such as Acetone for ?post processing.? Sanding and painting is possible but getting a finished and polished look is better with a chemical mooting agent.

Aurarum ABS is printer agnostic and as such is suitable for all brands including Flashforge, RepRap, Creality, Artillery, MakerBot, Ultimaker, Makergear, Up! … and many others.

Brand

Aurarum

Aurarum is a true Australian manufacturer that is here to support and provide you with 3D printer supplies. We manufacture and sell 3D printer filament that will fulfil your 3D printing needs. Among our 3D printer supplies, we can offer you 3D printer filament, Flashforge and ideaPrinters 3D printer and other 3D printer spare parts and parts required for your DIY project. Even though we are a manufacturer we welcome business, retail and wholesale customers. Apart from our 3D printer supplies, we can offer you a 3D printing service. No job is too small for us. Friendly and welcoming service will make sure that you are 100% satisfied with our service and we will see you back again. Our Australian made 3D printer filament is of the highest quality and yet with affordable price. The price is a lot lower than what you would expect to pay for a quality product. In our assortment, you will find PLA, ABS, Nylon, TPE and HIPS 3D printer filaments. Our colour range is wide as well it has 20 standard colours ranging from natural to something like safety yellow and safety orange that are quite bright compared to the other colours. On top of our standard colours, we can offer 4 glow in the dark colours Blue, Green, Violet and Aqua Blue. Using quality 3D printing supplies saves you time and money. As part of our services we can offer OEM service, where we would produce your branded filament. To the architects and everyone else we can offer colour matching service – the colour of the filament can be matched to the item that you have. So if you are after quality 3D printer supplies, 3D printing or a 3D printer look no further. We are here to help you with all your needs.

Additional information

Weight 1.3 kg
Dimensions 25 × 25 × 10 cm