Duet 3 Tool Distribution Board

AUD49.95 Inc GST

Duet 3 Tool Distribution Board

This board allows for the connection of up to 4 Duet 3 Toolboards to the Duet 3 Mainboard at one time, greatly simplifying the CAN-FD bus and power wiring. 

In stock (can be backordered)

Make 4 fortnightly payments of AUD12.49 with Afterpay More info

SKU: 602024399537 Category: Tags: ,

Description

Duet 3 Tool Distribution Board

This board allows for the connection of up to 4 Duet 3 Toolboards to the Duet 3 Mainboard at one time, greatly simplifying the CAN-FD bus and power wiring. 

The documentation contains more details. See below for a summary of the feature set:

  • 2- way barrier strip for power in.
  • Four 2-way JST VH connectors for power out to tool boards, individually fused 5A
  • Two RJ11 connectors for CAN bus in/out to connect to Duet 3 main board and expansion boards.
  • Four 4-pin JST ZH connectors to connect CAN bus to four Tool Boards.
  • Four pairs of 2-pin headers for fitting with jumpers to bypass unused tool board CAN connectors (6 jumpers shown fitted in the picture).
  • CAN bus termination 2-pin header, for fitting with a jumper if the CAN_OUT RJ11 port is not used (shown fitted in the picture)

The Tool Distribution Board is supplied with a connector pack containing the following:

  • 4 of 4-way JST ZH tails 150mm with fitted plug (CAN to tool boards)
  • 4 of 2-way JST VH housing & crimps (Power to tool boards)
  • 2 Fork connectors (Power in)
  • 9 loose 2-pin jumpers, for fitting to the CAN bypass 2-pin headers and CAN bus termination 2-pin header as required.
  • 4x M3 nylon washers for mounting holes

A loose 500mm RJ11 cable is also supplied for connecting the CAN_IN port to the Main Board, Expansion Board, or other tool distribution board.

Brand

Duet3d

Advanced 3D Printing ElectronicsDuet3D controller boards are advanced controller boards designed for various applications such as 3D printers, CNC, laser cutters and other.It is open source controller board that is running on a 32-bit Cortex-M4 CPU and runs open source firmware that has huge support from the developers and the community.The boards are easily expandable and makes them perfect for use in custom 3d printer applications and/or other CNC or laser projects.The boards have super quiet TMC2660 stepper drivers that can handle up to 2.4A stepper motors. The boards are connected to the network either via USB or Ethernet connections and makes life so much easier when you are 3D printing, because you can use web interface from your browser on either PC or any other device.And if the output rich board is still not enough for you - you can go one step further and add additional expansion board that will contain up to 7 additional drivers and other outputs.Aurarum produced printers are mostly based on the Duet3d controller boards. We use and sell genuine boards with high success and our customers like it.The boards can bet either used with common LCD12864 screens or could be used with 5" and 7" touch screen panels of your choice. The touchscreen panels can be either sourced from elsewhere or you could use nicely Duet3D designed integrated panels that a compact, look nice and work out of the box. The feature rich 32-bit controller board makes it perfect choice for your next 3d printer job. 

Additional information

Weight0.2 kg
Dimensions20 × 20 × 20 cm

You may also like…

  • or 4 payments of AUD38.74 with Afterpay

  • or 4 payments of AUD43.74 with Afterpay