Duet 3 Mini 2+ expansion board

AUD49.95 Inc GST

Introduction

The Duet 3 Expansion Mini 2+ is specifically designed for the expansion header of the Duet 3 Mini 5+. It may be possible to use it with other mainboards but this is not supported. It provides 2 x TMC 2209 stepper motors drivers with the same configurability as the 5 mounted on the Duet 3 Mini 5+ (i.e. UART control of all supported TMC2209 features, and stall detection signals).

In stock (can be backordered)

x
SKU: 602024399285 Category: Tags: ,

Description

Introduction

The Duet 3 Expansion Mini 2+ is specifically designed for the expansion header of the Duet 3 Mini 5+. It may be possible to use it with other mainboards but this is not supported. It provides 2 x TMC 2209 stepper motors drivers with the same configurability as the 5 mounted on the Duet 3 Mini 5+ (i.e. UART control of all supported TMC2209 features, and stall detection signals).

 

Features

The main hardware features of the Duet 3 Expansion Mini 2+ are listed below.

HARDWARE SPECIFICATION
On-board stepper drivers 2 x TMC2209
Stepper driver features Up to 2.0A peak current (TBC), microstep interpolation from any setting to x256, stall detection, stealthChop2
Other I/O NIL
Connection Directly mounted on the Duet 3 Mini 5+ Mainboard.

 

Firmware notes

Compatible RepRapFirmware versions: RRF 3.2 and later on the Duet 2 mini 5+ mainboard. There is no firmware loaded directly onto the Mini 2+ itself

The drivers are number “5” and “6” to reference them, for example to assign them as the third and fourth extruder:

M584 X0 Y1 Z2 E3:4:5:6

 

Operating limits

Stepper drivers Up to 2.0A peak current (TBC)
Input power voltage 11V to 25V (Via the Duet 3 Mini 5+ expansion header)
Fuses No on board fuses, shared V_FUSED protection from Duet 3 Mini 5+

Additional information

Weight 0.2 kg
Dimensions 20 × 20 × 20 cm

Brand

Duet3d

Advanced 3D Printing Electronics Duet3D controller boards are advanced controller boards designed for various applications such as 3D printers, CNC, laser cutters and other. It is open source controller board that is running on a 32-bit Cortex-M4 CPU and runs open source firmware that has huge support from the developers and the community. The boards are easily expandable and makes them perfect for use in custom 3d printer applications and/or other CNC or laser projects. The boards have super quiet TMC2660 stepper drivers that can handle up to 2.4A stepper motors. The boards are connected to the network either via USB or Ethernet connections and makes life so much easier when you are 3D printing, because you can use web interface from your browser on either PC or any other device. And if the output rich board is still not enough for you - you can go one step further and add additional expansion board that will contain up to 7 additional drivers and other outputs. Aurarum produced printers are mostly based on the Duet3d controller boards. We use and sell genuine boards with high success and our customers like it. The boards can bet either used with common LCD12864 screens or could be used with 5" and 7" touch screen panels of your choice. The touchscreen panels can be either sourced from elsewhere or you could use nicely Duet3D designed integrated panels that a compact, look nice and work out of the box.   The feature rich 32-bit controller board makes it perfect choice for your next 3d printer job.  

You may also like…