Genuine Bondtech Wanhao i3 kit

AUD159.95 Inc GST

Bondtech upgrade kit for Wanhao I3.

This kit provides a high-performance material feeding system with the ability to print faster with improved quality. The adjustable thumbscrew allows you to fine-tune the force acting on the filament.

The housing parts are professionally SLS printed in nylon for maximum strength and precision.

Out of stock

SKU: 697478824056 Category:

Description

Genuine Bondtech Wanhao i3 kit

The quick-release lever lets you load and unload filament with ease for quick filament changes.

Spring loaded pre-tension on the filament.

This kit uses the original steppermotor that came with the printer and is installed in around 1h.

Full installation guide available under the “Installation guide” tab.

For simple installation we have now produced a custom mounting bracket as you can find below in recommended parts.

The original metal plate that holds the extruder needs to be modified in order to give room for the extruder, this is easily done with a hacksaw and a file.

Maximum X-movement is restricted about 15 mm on the right side.

E-step needs to be adjusted to 140 step/mm (with the LCD panel)

Note! The version 2.1 of the WanhaoI3 have a different part cooling fan housing that will make the housing to be lower than the nozzle, a custom printed part cooling fan housing could be used instead.

Additional information

Weight 0.5 kg
Dimensions 20 × 20 × 20 cm

Brand

Bondtech

The company was established in 2014 by Martin Bondéus, who had previously used the 3D printing technology in his work as a product developer. When certain patents regarding the FDM technology expired at the beginning of the 2010s, Martin set out to build a 3D printer based on a pre-designed kit. The result, however, wasn’t satisfying. The performance and quality just weren’t there. Stubbornly, Martin therefore started building his very own printer from the ground up, not using kit products. This time the result was much better, but unfortunately still not good enough. Grinding, slipping and under extrusion translated into several failed prints. Scouring the internet for advice, he realized that the problem with bad, unreliable extrusion was universal. Everyone seemed to suffer from the same dilemma. An idea was born. Today, Bondtech manufactures Bondtech Dual Drive extruders and other innovative 3D printing products to users and retailers across the world. Constantly improving our offer, we believe this is just the beginning.