-
- 2.85mm filament
Aurarum PLA 3D Printer Filament – Yellow 2.85mm 1Kg
- AUD23.96 - AUD29.95 Inc GST
- Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
- Add to cart
-
- Nozzles
MK10 stainless steel nozzle (2pcs per set)
- AUD12.95 Inc GST
- MK10 stainless steel nozzle - M7 thread
- Select options This product has multiple variants. The options may be chosen on the product page
-
- 2.85mm filament
Aurarum PETG 3D Printer Filament – Black 2.85mm 1Kg
- AUD23.96 - AUD29.95 Inc GST
- Aurarum PETG is a moderately easy material to print with provided you have a heated and well levelled bed. A good starting point for a successful print is to have your hot end around 235 degrees and your hot bed around 70 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
- Add to cart
-
- 2.85mm filament
Aurarum PLA 3D Printer Filament – Orange 2.85mm 1Kg
- AUD23.96 - AUD29.95 Inc GST
- Aurarum PLA is the easiest material to print with ? A good starting point for a successful print is to have your hot end around 200 degrees and your hot bed around 55 degrees. All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
- Add to cart
-
- Engineering plastics, Nylon (PA)
Aurarum PA6 (Nylon) 3D Printer Filament – Black 1.75mm 1Kg
- AUD51.96 - AUD64.95 Inc GST
- PA6 is a much more difficult material in 3D printing than popular PLA or ABS. Its operating temperature range is 250-270°C, so you should ensure a suitable working environment with the material, so that the material does not shrink - closed working chambers of the 3D printer are recommended. Carbon fibers adds stiffness and make your parts lighter Made in…
- Add to cart
-
- Engineering plastics, Nylon (PA)
Aurarum PA6 CF (15% Carbon Fibre Nylon) 3D Printer Filament – Black 1.75mm 1Kg
- AUD103.96 - AUD129.95 Inc GST
- PA6 is a much more difficult material in 3D printing than popular PLA or ABS. Its operating temperature range is 250-270°C, so you should ensure a suitable working environment with the material, so that the material does not shrink - closed working chambers of the 3D printer are recommended. Carbon fibers adds stiffness and make your parts lighter Made in…
- Add to cart
-
- Nozzles
E3D V6 compatible hardened steel nozzle
- AUD13.95 – AUD19.95 Inc GST
- E3D V6 type hardened steel nozzle for 1.75mm filament E3D V6 Compatible - they are not original
- Select options This product has multiple variants. The options may be chosen on the product page
-
- Nozzles
Nozzle 0.6 mm Brass J-Head M6 Thread
- AUD12.95 Inc GST
- 0.6 mm all metal j-head nozzle E3D V6 Compatible - they are not original
- Add to cart
-
- Out of Stock
- Engineering plastics, Nylon (PA)
Aurarum PA6 (Nylon) 3D Printer Filament – White 1.75mm 1Kg
- AUD43.96 - AUD54.95 Inc GST
- PA6 is a much more difficult material in 3D printing than popular PLA or ABS. Its operating temperature range is 250-270°C, so you should ensure a suitable working environment with the material, so that the material does not shrink - closed working chambers of the 3D printer are recommended. Carbon fibers adds stiffness and make your parts lighter Made in…
- Read more
-
-
- Nozzles
Nozzle 0.2 mm Brass J-Head M6 Thread 2pcs
- AUD12.95 Inc GST
- 0.2 mm all metal j-head nozzle 1.75mm filament E3D V6 Compatible - they are not original
- Add to cart
-
- Electronics
BIQU BIGTREETECH SKR MINI E3 V2 32 Bit Control Board Integrated TMC2209 UART
- AUD59.95 Inc GST
- 32 bit controller board you get only the board without TFT and/or BLT or additional parts
- Add to cart
-
- Electronics
BIQU H2 500? 24V Extruder for 3D Printer
- AUD159.95 Inc GST
- BIQU H2 500° direct drive extruder is upgraded to support a maximum 500-degree celsius high high-temperature printing. Key Features: Wide range of filament adaptations. The h2 extruder is equipped with accessories such as heating block, and nozzle that support high-temperature printing, and also uses a more powerful cooling fan. It not only supports low-temperature printing for PLA, ABS, PETG, etc. (working…
- Add to cart
Shop
This is where you can browse products in this store.