Duet Laser Filament Motion Sensor

AUD64.95 Inc GST

This is a daughterboard specifically designed for the Duet 2 WifiDuet 2 Ethernet and Duet 2 Maestro that allows two PT100 temperature sensors to be attached. These PT100 sensors can be either two or 4 wire, there are jumpers on the latest version of the board for easily switching between two and 4 wire mode.

Available on backorder

Make 4 fortnightly payments of AUD16.24 with Afterpay More info

SKU: 697478831214 Category: Tags: ,


Duet Laser Filament Motion Sensor

Laser Filament Monitor

The Duet3D Laser Filament Monitor uses a IR laser optical motion detector to detect filament movement. The detected movement is transmitted to the Duet 2 Wifi, Ethernet or Maestro which uses the indicated movement to determine if the filament has run out, jammed or been ground away in the extruder. It is available for 1.75mm diameter filament only.

T The 3D-printed enclosure and M3 mounting bolts are not included. Please see the documentation for more information:  Documentation for the Duet3D Laser Filament Monitor.

Note: The Laser Filament Monitor is sensitive to the filament type used: it has proved less senstive to PETG of certain types. Please read the documentation for more details.

Warning: The Laser Filament Monitor is a Class 1 Laser device: Under normal conditions, the laser beam is always below the IEC/EN 60825-1:2014 maximum permitted output level of 716uW according to the manufacturer of the optical sensor; nevertheless we advise against looking into the beam when the filament monitor is powered. You should most definitely not look at the sensor through magnification when it is operating. The laser beam is invisible infra red, therefore your eye blink reflex will not protect you!



Advanced 3D Printing ElectronicsDuet3D controller boards are advanced controller boards designed for various applications such as 3D printers, CNC, laser cutters and other.It is open source controller board that is running on a 32-bit Cortex-M4 CPU and runs open source firmware that has huge support from the developers and the community.The boards are easily expandable and makes them perfect for use in custom 3d printer applications and/or other CNC or laser projects.The boards have super quiet TMC2660 stepper drivers that can handle up to 2.4A stepper motors. The boards are connected to the network either via USB or Ethernet connections and makes life so much easier when you are 3D printing, because you can use web interface from your browser on either PC or any other device.And if the output rich board is still not enough for you - you can go one step further and add additional expansion board that will contain up to 7 additional drivers and other outputs.Aurarum produced printers are mostly based on the Duet3d controller boards. We use and sell genuine boards with high success and our customers like it.The boards can bet either used with common LCD12864 screens or could be used with 5" and 7" touch screen panels of your choice. The touchscreen panels can be either sourced from elsewhere or you could use nicely Duet3D designed integrated panels that a compact, look nice and work out of the box. The feature rich 32-bit controller board makes it perfect choice for your next 3d printer job. 

Additional information

Weight0.1 kg
Dimensions5 × 5 × 5 cm