Aurarum ABS 3D Printer Filament – Safety Orange 1.75mm 1Kg
AUD28.95 Inc GST
Aurarum ABS is an easy material to print with provided you have a heated bed and sealed chamber. A good starting point for a successful print is to have your hot end around 235degrees and your hot bed around 100 degrees.
All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
In stock
Description
Aurarum ABS 3D Printer Filament – Safety Orange 1.75mm 1Kg
About ABS
ABS (Acrylo Butadiene Styrene) is a very strong and sturdy filament that is oil based. It is perfect for building LEGO blocks, toys, instruments, automotive trim and car parts.
It comes in many colours, blends and requires a heated bed and enclosed chamber to print with and is often a little more difficult to print with
Best settings for successful printing:
Printing / Extrusion temperature | 220 to 250 degrees |
Bed Temperature | 90 to 110 degrees |
Printing Speed | 20-80mm/s |
ABS is not biodegradable material. It is not renewable and is requires good ventilation when printing as the off gasses might be quite strong
ABS must be printed on a high temperature heated bed to avoid warping.
Strength | 8/10 |
Detail level | 9/10 |
Smooth Finish | 8/10 |
Transparency (colour dependent) | 2/10 to 8/10 |
Flexibility | 4/10 |
Reel Size | 200h x 65w |
Weight / metres | 1kg / 340 metres (approx) |
Filament width | 1.75mm +/- 0.03mm |
Spool hub size | 52mm |
Like any 3D printing a well ventilated space is preferred and good storage is the key to a good shelf life of your filament. All our filament is shipped in a vac sealed bag containing a small desiccant satchel.
It is highly recommended to dry the filament before the use. Filament dryers such as Sunlu Fila Dryer and/or Printdry pro are recomended.
Dried filament give the best results.
ABS requires the use of chemicals, such as Acetone for post processing. Sanding and painting is possible but getting a finished and polished look is better with a chemical smoothing agent.
Aurarum ABS is printer agnostic and as such is suitable for all brands including Flashforge, RepRap, Creality, Artillery, MakerBot, Ultimaker, Makergear, Up!, Voron … and many others.
Additional information
Weight | 1.3 kg |
---|---|
Dimensions | 10 × 17 × 17 cm |
Brand
Aurarum
You may also like…
-
- Out of Stock
- Accessories and parts, Filament drying
PrintDry Filament Dryer PRO
- AUD274.95 Inc GST
- Read more
-
-
- Sale!
- Accessories and parts, Filament drying
SUNLU Fila Dryer S1
- Original price was: AUD89.95.AUD64.95Current price is: AUD64.95. Inc GST
- Add to cart
-
- Accessories and parts, Build surfaces, Other
Vision Miner – 3D Printer Bed Nano Polymer Adhesive
- AUD59.95 – AUD104.95 Inc GST
- Select options This product has multiple variants. The options may be chosen on the product page