Aurarum ABS 3D Printer Filament – Carbon Fiber (20%) 1.75mm 0.9Kg
AUD79.95 Inc GST
Aurarum ABS is an easy material to print with provided you have a heated bed and sealed chamber ? A good starting point for a successful print is to have your hot end around 235-255degrees and your hot bed around 100 degrees.
Carbon Fiber (CF) contents – 20%
All AURARUM filaments are 100% Australian made right here in Melbourne, Victoria.
Support a local Australian business supporting Aussie families.
Aurarum ABS 3D Printer Filament – Carbon Fiber 1.75mm 0.9Kg
ABS (Acrylo Butadiene Styrene) is a very strong and sturdy filament that is oil based.? It is perfect for building LEGO blocks, toys, instruments, automotive trim and car parts.
It comes in many colours, blends and requires a heated bed and enclosed chamber to print with and is often a little more difficult to print with
Best settings for successful printing:
|Printing / Extrusion temperature||220 to 250 degrees|
|Bed Temperature||90 to 110 degrees|
ABS is not biodegradable material.? It is not renewable and is requires good ventilation when printing as the off gasses are quite strong
ABS must be printed on a high temperature heated bed to avoid warping.
|Transparency (colour dependent)||2/10 to 8/10|
|Reel Size||200h x 65w|
|Weight / metres||0.9kg / 400 metres (approx)|
|Filament width||1.75mm +/- 2mm|
|Spool||Plastic, Vacuum packed|
Like any 3D printing a well ventilated space is preferred and good storage is the key to a good shelf life of your filament.? All our filament is shipped in a vac sealed bag containing a small desiccant satchel.? When opening your bag a clean cut along the top edge will allow you reuse that bag again if you do not finish the entire reel in 1 go.
ABS requires the use of chemicals, such as Acetone for ?post processing.? Sanding and painting is possible but getting a finished and polished look is better with a chemical mooting agent.
Aurarum ABS is printer agnostic and as such is suitable for all brands including Flashforge, RepRap, Creality, Artillery, MakerBot, Ultimaker, Makergear, Up! … and many others.
|Dimensions||25 × 25 × 10 cm|