3D Printer Board ARM 32Bit Lerdge-K Control Motherboard with 3.5inch TFT LCD for Dual Extruder 3d printer with TMC2209
AUD275.00 Inc GST
Comes with TMC2209
3D Printer Motherboard Lerdge K 3.5inch Touchscreen ARM 32-bit Controller Board
Lerdge-K is an upgraded version of the Lerdge-S motherboard. The most essential difference is that with all the functions of the Lerdge-S motherboard, an auxiliary motor control port is added, and the auxiliary motor can be flexibly expanded to dual X-axis, dual Y-axis and dual Z-axis models. It can also be used as a synchronous motor for the E0 or E1 extruder to design a printer that operates in parallel.
Lerdge-K board make the printer design flexible, and also provides hardware support for later motherboard expansion of the third extruder or support for two independent nozzles model .(This feature is temporarily not open, the software needs to be improved and tested, and it needs to wait for a while.)
Hotend=Thermistors temperature measurement(ntc 100k and PT100)
Heatbed=Thermistors temperature measurement(ntc 100k )
Support 3d printer types XYZ, Detla, CoreXY, CoreXZ, Ultimaker, Hbot
1. More modules used with the Lerdge motherboard will be available, please add our store to your list for more convenient checking.
3. The latest firmware download address: lerdge.com
About the Lerdge-K motherboard auxiliary motor function Descriptions: The auxiliary motor can be used for dual X-axis, dual Y-axis, dual Z-axis or copy extruder E0 or extruder E1 (depending on the specific model of the printer), but it can not be used for the third extruder.
About the USB port instructions: Note that the USB port can not be directly connected to the computer as a power input port. The USB port can be extended with a U disk, but please make sure the extension cable should not be used too long. In order to avoid the printing process failure, it is recommended to use the brand genuine U disk. The expansion disk or recycling U disk may lead to problems such
In stock (can be backordered)
Come with TMC2209 drivers
|Dimensions||20 × 10 × 10 cm|