Net filament weight: 1.0 kg
|1.75mm||1.75mm||±0.1mm||Suitable for all direct feed and Bowden type extruders|
|3.00mm||2.85mm||±0.1mm||Suitable for all direct feed and Bowden type extruders|
|PLA||175 -220°C||Very easy to print with, it gives clean results and is much less likely to warp. The best material for most applications, great for beginners!|
|ABS||200 -240°C||Very strong and tough with good flexibility, great for structural parts. More likely to have warping issues.|
|TPE(rubber)||175 -200°C||Very flexible material, must be printed very slowly to avoid issues. Recommended for advanced users.|
|TPU(rubber)||175 -200°C||Very flexible material, must be printed very slowly to avoid issues. Recommended for advanced users.|
|HIPS||200 -240°C||Very strong and tough with good flexibility, great for structural parts, similar to ABS. Can be used as a support as it is dissolvable by Limonene.|
|Nylon||200 -250°C||Tough on wear, good for parts under constant friction. It’s important not to print too hot as its properties tend to degrade.|
Compatibility with printers:
Our filament is compatible with most 3D printers such as Wombot, Flashforge, RepRap, MakerBot, Ultimaker, Up!, Makergear etc.
If you aren’t sure if this filament will work with your printer, please send us an email at: email@example.com
We are an Australian 3D printer filament manufacturer. Our filament is manufactured in our factory in Ringwood, Victoria from raw materials, so you can expect FAST and RELIABLE service.
We also take custom filament orders – you can choose the colour and/or material.
Wholesale inquiries welcome.
|Dimensions||17 × 17 × 10 cm|